The category of door fittings includes a number of additional devices used in the construction of interior and exterior doors. Without such parts, the full functioning of the product is impossible, but many consider them to be secondary components and do not attach importance to the process of choosing such devices. Most manufacturers offer models that fully correspond to the style and characteristics of the canvas, so that buyers have the opportunity to choose the most suitable design solution.
Types of door handles
Handles are one of the key elements of the door hardware. Among products of this type, there are several main varieties:
On the strip – additionally equipped with a key hole. When choosing such devices, you should pay attention to the center distance, since some models are not suitable for every locking mechanism.
Stationary – fixed to the canvas with several screws. To open the door, in this case, it is enough to pull it in the right direction.
Press – equipped with a latch, set in motion by pressing. Such handles cut into the canvas and are connected to the locking device.
Knobs – have a round or elongated oval shape. The door is opened by turning the handle clockwise. The keyhole located in the center of the handle can be through or closed on one side with a latch or plug.
Push door handle
Closers and stoppers
Door closers are designed for mechanical closing of the door in automatic mode. Products of this type significantly reduce the level of wear on the hinges. In addition, such devices extend the life of the locking mechanism by slowing down the blade before the lock bolt directly contacts the box.
The use of stoppers helps to prevent damage to both the door itself and the walls of the opening. Such elements of door hardware limit the maximum range of movement of the structure. Such products can be both built-in and wall-mounted or floor-standing.
Classification of door hinges
There are several types of hinges for entrance and interior doors:
- Screw-in – screwed into a box or a protrusion located on the end of the structure. For the installation of parts of this type, pins are used. The complete set of such products includes decorative caps, the use of which will help preserve the integrity and harmony of the composition.
- Overhead is the most economical option. In most cases, these hinges are made of brass. Their disadvantages include the fact that after a certain period of time, the door may begin to creak during the opening process.
- Hidden – they are fixed with screws and are inferior in reliability to a welded joint. The advantage of this type of loops is their invisibility against the background of the canvas. Such products can be painted in one of several shades – “chrome”, “bronze” or “brass”.
Glass inserts serve as a decorative function, decorating the surface of the door. The glass used for production can be matte, transparent, stained glass or decorated with a sandblast pattern. The use of such elements allows you to achieve better illumination of the room.
To increase the strength of the structure, a special material is used – triplex. It is a laminated tempered glass that is shock and damage resistant. Decorating doors with glass inserts will make their appearance more original and bright.
Also Read: lilymanga